KRX 1000 Front Door Caps

Does your Kawasaki KRX 1000 suffer from fractured door syndrome? Has it pinched your arm yet? Do you just hate the way your doors look with the top seam split open?

Well we’ve got the fix!

Class 1 Motorsports developed a door cap that will hold your inner and outer door plastics together and look great doing it.

This kit comes with both driver and passenger side door caps and 10 push darts.

Easy 10 minute install and all you need is a drill with a 5/16″ drill bit.

CLICK HERE FOR KRX4 REAR DOOR CAPS OR FRONT/REAR SET

Instructions:

1. Pinch the top of the door back together, use tape to hold them shut if needed
2. Line up the inner rear corner of the door cap with the rear edge of the door, maker sure the cap is seated on the top of the door and drill through the inner door panel using the cap as a guide, start with the hole closest to the rear of the door.
3. Once you drill the first hole insert a push dart but do not depress the center yet, work your way to the front of the door drilling one hole at a time and inserting a dart then moving to the next hole.
4. Remove all darts, remove door cap, wipe away any drill debris, then re-install cap, install push darts and depress the center pin of the push darts now.
5. Repeat on the other side of your car

Note: The door caps are made from a polyurethane material, this allows them to be flexible but rigid at the same time. The door caps twist slightly when they come out of the mold, this is normal and they easily take proper shape when installed. Just make sure you hold them tight to the top of the door when installing.

Door caps only available in BLACK.

**Due to the manufacturing process, some pieces may have small surface imperfections and dimpling, but they do fix the problem. We have worked tirelessly to fix this issue and keep the price point close to the same. The pictures attached are some of the worst ones. We apologize for the delay and appreciate your patience.