You don’t have to leave your plug out in the weather.

Plug Buddy keeps your 7-way RV plug dry, clean, and upright when it’s unhooked, helping delay corrosion on the contacts. Strong magnets let you stick it anywhere on the trailer. Prefer a fixed mount? The bolt-hole version lets you permanently secure it on aluminum and other non-ferrous surfaces (coming soon).

Other colors are available by special request

Fits standard SAE J2863 7-way RV blade trailer-end plugs

Made right here in Pennsylvania with USA sourced materials!

The post Plug Buddy appeared first on .

8 gang switch panels ONLY, for now.

The cup holders are drink boilers anyways so this makes good use of that spot which is easy and convenient to reach from the shift handle. You can buy our cup holders that mount to the passenger grab bar to get your beverages secured.

Fitment:

• Harbor Freight brand Roadshock - 8 gang
• Auxbeam model BA80 - 8 gang
•  T-REX OFFROAD brand 8 gang - COMING SOON!
• We have another version for the larger 8 gang with beveled corners like Infinite Offroad brand switch panels. Available soon.

If you order it is considered a pre-order for the devices listed above, if you aren't sure please call in or email.

The post KRX Center Console Switch Panel Mount appeared first on .

Our new Laser Insert turns them in to another simple, accurate layout tool.

• Self centering grip fins hold the laser firmly centered
• Laser included
• Compatible with our Tube Notching Templates (sold separately)

LINK FOR TUBE NOTCH TRACE TEMPLATES HERE

The post Laser Insert for Notch Trace Templates appeared first on .

Beware of cheap aluminum shift gates from Ebay sellers overseas. They will grind (metal on metal) when you shift resulting in sharp edges on the gate which are unsightly and unsafe. Don't waste your time. Install this one once and be done.

This is a premium upgrade for your H2 made from durable and impact resistant plastic for smooth gear selection, just as Kawasaki intended.

Need to quickly reverse in the dark? Simply reach down and pull back, no need to take your eyes off the trail! Skip the maze and take a straight shot to the position you need. Always find gear when you need to. Many technical drivers require engaging reverse gear as fast as possible when the front end starts to lift up.

• Fits all years of the Teryx / Teryx5 H2 platform
• Direct bolt-in replacement for your OEM shift surround
• Re-use all factory hardware
• Slotted bolt holes to achieve proper alignment
• Easy install
• Makes shifting fast and much simpler
• Made in the USA from durable polymers

The post Shift Gate – H2 Supercharged appeared first on .

Kawasaki Teryx H2 Speaker Pods

• Low profile design, we kept the pods as thin as we could!
• Fitment for most 6.5 speakers
• Pictured with JL Audio M3-650X-S-GM
• Matches the contours of the door panels perfectly
• Screws go in from the inside of the door panel to the back of the pod
• Precision fit
• Manufactured in Pennsylvania
• Made from USA sourced high temp polymers

This is kind of a DIY kit. I provide the speaker pods, you source the rest.

Front Pods will need #8 sheet metal screws 1/2" long. I prefer round head stainless, no taper. Each pod needs (4)

Rear Pods will need #8 sheet metal screws 3/4" long. I prefer round head stainless, no taper. Each pod needs (5)

The rear pods have an optional hole for a bolt through the face. Use a black screw or just add a dab of black RTV, most won't notice it.

Drilling template is INCLUDED for the Front Pods

For the Rear Pod install- you will need the skills and ability to transfer the bolt holes from the pod to the door panel so you can predrill the holes.

You can buy the template from me but it's stupid expensive because it takes more machine time to make it than the speaker pod. I'm working on a solution to this.

Feel free to call in with any questions!

The post Teryx H2 Speaker Pods appeared first on .

Base features bolt holes compatible with 5mm or #10 hardware (not included).

Includes stainless steel clamping bolts for secure attachment of your Starlink Mini. Requires 4mm hex wrench (available as add-on).

The post Starlink Mini Mount appeared first on .

All the key design elements were taken from our very popular KRX cupholder.

• Simple and sleek design
• Easy install, no drilling
• Easily slides on to the passenger grab handle
• For cups up to 78 mm (3.07 inches)
• MADE IN THE USA

YOUR CUP MUST BE 3-1/16" (78 MM) DIAMETER OR LESS

PLEASE MEASURE YOUR CUP TO VERIFY FITMENT

The post Talon Cup Holder appeared first on .

The post Heat Sync Retainer appeared first on .

Two-piece design, the top part can be removed while leaving the base attached. This also allows you to use the base as the perfect drilling template. The design shares the same signature elements as my KRX and H2 dash mounts. You can expect high quality parts that are unmistakably professionally designed.

CLICK HERE for product video

Video above is for KRX and will soon be updated to show the X3

Our mount fits the contour of the X3 dash for a sleek look and easy install.

Designed to stay in place and endure rough terrains or racing.

NOT COMPATIBLE WITH FOSGATE DASH - OEM ONLY

The post Dynojet PV3 Dash Mount – Maverick X3 appeared first on .

Choose your mount:

• 1.75" tube
• 2.0" tube
• Flat two-bolt flange for roofs or panels

Choose your hanger:

• headset / goggle hanger
• small hook for helmets / steering wheels / etc. (35 mm opening)
• large hook for helmets / steering wheels / etc. (50mm opening)

Call in or email SALES@TERYXOFFROAD.COM to request multiple hanger types with your order.

The post Roll Cage Hangers appeared first on .