Our design is gated for a fast selection between Low and Reverse or High and Reverse.

Need to quickly reverse in the dark? Simply reach down and pull back, no lookies! Skip the maze and take a straight shot to the position you need. Always find gear when you need to.

Many technical drivers require selecting reverse gear as fast as possible when the front end starts to lift up. We all know the KRX has a bit of a delay as it is and does not like to freewheel backwards so every second counts when playing on the rocks or steep inclines. Many benefits for normal trail riding as well!

• Fits all years of the KRX / KRX4 platform
• Direct bolt-in replacement for your OEM shift surround
• Re-use factory hardware
• Easy Install
• Makes shifting fast and much simpler
• Made in the USA from durable polymers
• CLICK HERE FOR VIDEO

Pictured with our KRX Shift Handle

The post KRX Shift Gate – KRX 1000 / KRX 4 appeared first on .

• Direct replacement, no modifications required
• Smooth and comfortable; no sharp edges or corners
• Feels like a quick shift due to the short handle
• Stable temperature - does not transfer hot/cold temps to your hand
• Includes stainless steel hex bolt (4mm hex wrench needed)
• Fits all years of the KRX / KRX4 platform
• USPS shipping with tracking (Canada shipping available by request)

Contact us for custom colors!

INSTALL TIP: When removing the original shift handle the  retaining bolt can be very tight. If you fear it will strip, CAREFULLY and AT YOUR OWN RISK use a soldering iron or wood engraver to make contact with the bolt briefly. Just enough to warm up the thread locker from the assembly factory. When installing the new shifter, please do not overtighten the bolt.

The post Shift Handle – KRX 1000 / KRX4 appeared first on .

• Direct replacement, no modifications required
• Smooth and comfortable; no sharp edges or corners
• Feels like a quick shift due to the short handle
• Stable temperature – does not transfer hot/cold temps to your hand
• Includes stainless steel hex bolt (4mm hex wrench needed)
• Fits all years of the Teryx 800, 2 door and 4 door
• USPS shipping with tracking (Canada shipping available by request)

INSTALL TIP: When removing the original shift handle the  retaining bolt can be very tight. If you fear it will strip, CAREFULLY and AT YOUR OWN RISK use a soldering iron or wood engraver to make contact with the bolt briefly. Just enough to warm up the thread locker from the assembly factory. When installing the new shifter, please do not overtighten the bolt.

The post Shift Handle – Teryx 800 / Teryx4 appeared first on .