Fitment: 

• 2020-2025 Kawasaki Teryx KRX / KRX4 1000

Weight:
Stock Muffler: 25.30 lbs
GGB Quiet: 15.30 lbs
Weight Savings: 10.00 lbs

GGB QUIET SERIES –DEEP ENHANCED TUNED SOUND

Attention KRX owners. You asked for a quieter KRX muffler so we designed one.
The GGB Exhaust Quiet Muffler sets a new standard for sound control and performance. Performance increase does not have to mean sound increase and the GGB Quiet Muffler proves just that. The Quiet Muffler utilizes a chambered core which provides enhanced sound and increased exhaust flow while keeping sound levels in the cab and outside the machine at an ear pleasing level. The deeper more pronounced exhaust note is noticeable at idle and when the RPM's start to climb the exhaust note sings a more finely tuned sound when compared to the stock muffler. If you're looking for added performance, simple install, low in car sound levels and a deeper more tuned exhaust note, look no further than the GGB Exhaust Quiet Series Muffler for the Kawasaki KRX.

Each Kawasaki KRX system is manufactured from high quality 304 stainless steel and is a direct bolt-on to the factory exhaust mounts.  No fuel tuner is required, simply install and go using the factory fuel management since the increased exhaust flow we’ve incorporated into the system design can be managed by the stock fuel management system. However, if you’re still looking for a power increase, adding a new tuner will increase fuel delivery, and the exhaust system will also benefit.

Looking for a little more bark? We've got that too. Check out the GGB Exhaust Kawasaki KRX Trail and Sport mufflers for a more aggressive exhaust note.

KEY FEATURES

• In-house designed, dyno tested, real-world proven
• Increased horsepower, torque, and exhaust flow
• Combination chambered absorption muffler technology
• Deep enhanced tuned sound
• Low in cab sound levels
• Fully welded 304 stainless steel system
• Removeable style spark arrestor
• Works with stock or aftermarket tune

The post GGB Quiet Muffler – Teryx KRX 1000 appeared first on .

GRAB BAR CUPHOLDER -

• Will fit cups / tumblers up to 78 mm diameter (just over 3″)
• Simple and sleek design
• Open and close your glove box easily, some other cup holders don't allow for this
• Easy install, no drilling
• Slides on the passenger grab handle

YOUR CUP MUST BE 3-1/16" (78 MM) DIAMETER OR LESS

PLEASE MEASURE YOUR CUP TO VERIFY FITMENT

NEW VERSION AVAILABLE TO ACCOMODATE LARGER MUGS OR 1 LB CYLINDERS FOR HEATERS

LEFT SIDE IS 4" AND TALLER FOR MORE SUPPORT, RIGHT SIDE IS A 3" CUPHOLDER

FITS TERYX H2 AND KRX

The post KRX & H2 Cupholder appeared first on .

Newly Designed Single Exit Full Exhaust System for Kawasaki KRX 1000 & KRX4

Pair this with a Dynojet Powervision Reflash

• 304 brushed stainless steel header pipes
• Single 14" Stainless Steel muffler
• 2.5-inch baffle for improved exhaust flow
• Fully Tig Welded
• 6061 Billet Muffler Clamps
• 6061 Billet Machined Exhaust Tip
• Oxygen sensor bung
• Quiet core included
• USFS approved spark arrestors
• Significant horsepower and torque gains
• Includes laser-cut Trinity back plate
• 2 year warranty
• Made in the USA
• Fits all years of the Kawasaki KRX 1000 / KRX4

The post Trinity Full Exhaust System – KRX 1000 / KRX 4 appeared first on .

• 304 brushed stainless steel head & mid pipes
• Dual aluminum mufflers brushed or black finish
• Fully Tig Welded
• 6061 Billet machined muffler mounting brackets
• 6061 Billet Machined Exhaust Tips
• Oxygen sensor bung
• USFS approved spark arrestor
• Significant horsepower and torque gains
• Light Weight Design
• 2 year warranty
• Made in the USA

The post Teryx – Full Exhaust System appeared first on .

• Improved braking performance
• Durable pads for a long life
• No noise
• No fade
• Exclusive high-heat friction material

*INCLUDES 2 PADS = 1 WHEEL*

The post Brake Pads – Teryx / Brute Force appeared first on .

• Improved braking performance
• Durable pads for a long life
• No noise
• No fade
• Exclusive high-heat friction material

*INCLUDES 2 PADS = 1 WHEEL*

The post Brake Pads – KRX 1000 / KRX4 appeared first on .

Keep your RTIC Cooler firmly in place while trail riding with our mount brackets designed specifically for the KRX and KRX4.

No messy ratchet straps, ropes or turnbuckles. No removing all of that crap just to open your cooler.

• Precision laser-cut steel
• Durable sleek black powder coat
• Uses existing mounting locations in the bed
• Compatible with factory subwoofer
• Quick-release hardware (optional)
• Fits all years KRX / KRX4

Whether you're trail riding, mudding, rock crawling or rolling over you can trust your cooler stays securely fastened in the bed of your buggy, providing you with the peace of mind you need to ride however you desire!

NOT Compatible with Kawasaki KQR Storage Tailgate

The post RTIC Cooler Bed Mount KRX appeared first on .

The post Hitman Beadlock MetalFX 4-Lug UTV Wheels (Black, Bronze, Raw) appeared first on .

Our design is gated for a fast selection between Low and Reverse or High and Reverse.

Need to quickly reverse in the dark? Simply reach down and pull back, no lookies! Skip the maze and take a straight shot to the position you need. Always find gear when you need to.

Many technical drivers require selecting reverse gear as fast as possible when the front end starts to lift up. We all know the KRX has a bit of a delay as it is and does not like to freewheel backwards so every second counts when playing on the rocks or steep inclines. Many benefits for normal trail riding as well!

• Fits all years of the KRX / KRX4 platform
• Direct bolt-in replacement for your OEM shift surround
• Re-use factory hardware
• Easy Install
• Makes shifting fast and much simpler
• Made in the USA from durable polymers
• CLICK HERE FOR VIDEO

Pictured with our KRX Shift Handle

The post KRX Shift Gate – KRX 1000 / KRX 4 appeared first on .

The DMS diff lock gear Upgrade is CNC machined from 300m steel and treated with a proprietary process to provide the best tensile strength for gears under high load. The installation process is straight forward and requires no special tools.

The post Diff Lock Gear Upgrade 300M Billet Steel – KRX 1000 / KRX 4 appeared first on .