For a clean cope, slide our template over the pipe and mark your cut line, easy peasy. No more guessing!

Get the perfect cope every time, over and over. You can also lay the notched end on an existing pipe to determine if angle is sufficient or anticipate where your intersecting joints will be.

Features:

• Each template is labeled (pipe size and degree of angle)
• Slot down the middle for centerline visibility and indexing
• Chamfered edge to get a good sharpie mark all the way around
• Made in the USA from durable PETG polymers

Each (8) piece set includes:

• 15 °
• 22.5 °
• 30 °
• 45 °
• 60 °
• 67.5
• 75 °
• 90 °

Available Sizes:

• 0.50" PIPE (0.840" OD)
• 0.75" PIPE (1.050" OD)
• 1.00" PIPE (1.315" OD)
• 1.25" PIPE (1.660" OD)
• 1.50" PIPE (1.900" OD)
• 2.00″ PIPE (2.375″ OD)
• 2.50" PIPE (2.875" OD)

Individual replacements are available, call or email sales@teryxoffroad.com

*PRO TIP – if your tube is undersized, simply use a rubber band to help hold the template while you mark it.

The post Pipe Notching Templates appeared first on .

Roll Cages, Chassis, Bumpers, All Tube Fabrication and Welding can benefit from this simple time-saving layout tool!

For a clean cope, slide our trace template over the tube and mark your cut line, easy peasy. No more guessing!

Get the perfect cope every time, over and over. For mock-up, you can also lay the notched end on an existing tube to determine if angle is sufficient or anticipate where your intersecting joints will be.

Features:

• Each template is labeled (size and degree)
• Slot down the middle for centerline visibility and tube clocking
• Chamfered edge to get a good sharpie mark all the way around
• Made in the USA from durable PETG polymers

Each (8) piece set includes:

• 15 °
• 22.5 °
• 30 °
• 45 °
• 60 °
• 67.5
• 75 °
• 90 °

Available Tube Sizes:

• 0.25"
• 0.375"
• 0.50"
• 0.625"
• 0.75"
• 1.0"
• 1.25"
• 1.5"
• 1.625"
• 1.75"
• 2.0"
• 2.5"

Individual replacements are available, call or email sales@teryxoffroad.com

*PRO TIP - if your tube is undersized, simply use a rubber band to help hold the template while you mark it.

The post Tube Notching Templates appeared first on .